Do not install the Getway RAID Recovery Software to the drive(s) you want to recover! It is strongly recommended to proceed as follows:
Install the program to a computer, which doesn't have any problems. If you have a choice, choose the computer which has the most RAM and is the fastest. Attach the drives you want to rebuild the RAID from as additional drives to this machine. You will need a controller card capable of handling several drives. Each drive must be individually accessible. If your RAID controller passes the access to individual drives through to the operating system, you can use that controller for our purpose. If it doesn't, get another non-RAID controller.
An alternative to the use of the drives is the use of image files. You would have to add one drive at a time, make the image, remove the drive, add the next drive, make the image etc. until you have images for each RAID component. Of course, you will need sufficient space to store these image files. If any of your RAID drives is having physical problems, we strongly recommend the creation of images before continuing with the recovery.
Install
After downloading the Getway Raid Recovery Software run the setup.exe. The setup wizard will guide you through the installation process.
Uninstall
The Software has the automatic uninstall function which can help you uninstall all the files, program groups, shortcuts and registration tables of the Software.
Attention:
If you want to uninstall the software, please don't forget to abolish the safe operation done before. Such as: cancel the disk unhidden, cancel the simulated files, and abolish the encrypted files, etc. because these operations will not be automatic abolished by the uninstall operation.
Method 1:
Step 1: Start the computer and enter the Operating System;
Step 2: Open "My Computer" –> "Control Panel" one by one, and then click ""Add / Remove Programs" option;
Step 3: Select the "Getway Raid Recovery.exe" from the "Change/Remove" interface, and then click the "Change/Remove" button, last choose the "Automatic Mode" to uninstall the program.
Method 2:
Step 1: Finished the installation.
Step 2:
Find the "Uninstall.exe" from the installation program catalogue (The address of the default installation is: Disk C -> Program Files -> Getway Recovery LTD -> Getway Raid Recovery).
Step 3: Double click the "Uninstall.exe" to uninstall the program.
NT/XP users: You must have Administrator rights to run this program.
Vista users: You must switch User Access Control (UAC) off.
Follow the above operation clues; you can uninstall the Software in a short time. After uninstall the program, we suggest you restart you computer to update the system.